Basic Jobsite Safety Rules

Basic Jobsite Safety Rules
Posted on October 3, 2016 in Featured, Insurance Management, Safety Managers

Print This Post Print This Post

  1.  Hard hats will be worn by all employees and volunteers on the site when work is being performed at a level above the employees or volunteers
  2. Z87 rated safety glasses will be worn as the minimum required eye protection where a hazard dictates – such as cutting or other dusty activity.
  3. Fall Protection Requirement – full body harnesses much be worn and secured at any time there is a fall hazard of more than 6 feet.
  4. Shirts much have a least a tee sleeve. Pants are also preferred over shorts in order to reduce the risk of lacerations, however high temperatures and the tasks required should be considered when determining the appropriateness of clothing.  Sturdy work boots are strongly recommended.  Clogs and loafers are not permitted.
  5. Firearms, alcoholic beverages, illegal drugs are prohibited on the site.
  6. Housekeeping is an integral part of the job and employees/volunteers are responsible for keeping their area clean and hazard free.  Clean-up is required of the site at the end of the day.
  7.  All tools, whether company or personal must be in good working condition.  Defective tools cannot be used (examples – unguarded saws, hammers with loose or split handles, etc.)
  8.  All scaffolding and work platforms must be built and maintained in accordance with OSHA specifications (inspected and approved by job supervisor).
  9. All extension cords, drop cords, electrical tools should be inspected, properly grounded (GFI).
  10. Horseplay on the site is prohibited.
  11.  Glass containers or bottles of any kind are not permitted.
  12.  All floor openings or excavations should be properly barricaded on all sides to ensure employees/volunteers are aware of the hazard.
comments powered by Disqus

Sorry, that passcode is incorrect.

Submit

Online Training Course Instructions

Read this entirely before proceeding to a training course.

Access Code: W8NAEBTG

Recommended Courses

  • You are Exposed: General Affiliate Safety
  • Fall Safety
  • ReStore Safety & Loss Control
  • Volunteering on a Habitat for Humanity Job Site

Take Training Course Now
Instructions
  • After reading these instructions in their entirety, click on Take Training Course Now.
  • In the Employee Access Code box enter: W8NAEBTG and press Submit. This is the code for all Habitat affiliates and volunteers to use.
  • The Safety Courses catalog screen offers a diverse selection of safety courses, including four Habitat-specific courses. Course completion time ranges from 15 to 30 minutes.
  • Click the name of the course you wish to take. The course loads and starts automatically. When the presentation has ended you will be prompted to take a Quiz.
  • Upon completion of the Quiz, you’ll be given your accuracy score, indicating Pass or Fail.
  • If you Fail, you may log in again and re-take the course at a later time
  • If you Pass, you will be directed to a course completion screen. On this screen enter your First Name and Last Name in the appropriate fields. In the Location field enter the Habitat affiliate name you are working with.
  • Course completion information is provided to HFHI, the program administrator and program underwriter.